From: Alexei Monastyrnyi (alexeim@orcsoftware.com)
Date: Thu Oct 26 2006 - 04:45:51 ART
I think yes, you should. Queuing generally works in outgoing direction,
so having it set up for one side only would improve a quality for that
side while opposite stream (within the same conversation) might suffer
with lack of LLQ.
HTH
A.
haducbinh wrote:
> Hi GS!
>
> This is my topology: (LAN1)------R1(S0/0) ----(FRAME-RELAY)--------
> (S0/0)R2---(LAN2)
>
> User in LAN1 and LAN2 using VoiceIP to communicate, so to ensure that, Voice
> IP traffic get priority over other traffics
>
> I config LLQ for connection between R1 and R2!
>
> My question is:
>
> Do I need to config LLQ for both side: S0/0 of R1 and S0/0 of R2
>
> or just need to config on one side?
>
>
>
> Thanks!
>
> HaDucBinh
> Mail: <mailto:haducbinh@vnpro.org> haducbinh@vnpro.org or
> <mailto:haducbinh@yahoo.com> haducbinh@yahoo.com
> Phone: +84 908 191 322
> ---------------------------------------------------------------------------
> Vietnamese Professionals (VnPro)
> Cisco Authorised Training
> 149/1D Ung Van Khiem Street, Ward 25, Binh Thanh District, Ho Chi Minh City
> Tel: (08) 5124257 - (08) 5125314
> Fax: (08) 5124314
> Website: <http://vnpro.vn> http://vnpro.vn
> Support Forum: <http://vnpro.org> http://vnpro.org
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:06 ART