RE: dual catalys switch configuration

From: Jerzy Szczypien (jerrysz@telusplanet.net)
Date: Mon Oct 23 2006 - 23:50:23 ART


Thanks in advance

 

Jerzy

 

cat3550-1#show intf fa0/23 switchport

Name: Fa0/23

Switchport: Enabled

Administrative Mode: dynamic desirable

Operational Mode: down (suspended member of bundle Po1)

Administrative Trunking Encapsulation: dot1q

Negotiation of Trunking: On

Access Mode VLAN: 1 (default)

Trunking Native Mode VLAN: 1 (default)

Administrative Native VLAN tagging: enabled

Voice VLAN: none

Administrative private-vlan host-association: none

Administrative private-vlan mapping: none

Administrative private-vlan trunk native VLAN: none

Administrative private-vlan trunk Native VLAN tagging: enabled

Administrative private-vlan trunk encapsulation: dot1q

Administrative private-vlan trunk normal VLANs: none

Administrative private-vlan trunk private VLANs: none

Operational private-vlan: none

Trunking VLANs Enabled: 1,10,20,30,40,55,60,100,999

Pruning VLANs Enabled: 2-1001

Capture Mode Disabled

Capture VLANs Allowed: ALL

Unknown unicast blocked: disabled

Unknown multicast blocked: disabled

Appliance trust: none

 

cat3550-1#show int fa0/24 switchport

Name: Fa0/24

Switchport: Enabled

Administrative Mode: dynamic desirable

Operational Mode: down (suspended member of bundle Po1)

Administrative Trunking Encapsulation: dot1q

Negotiation of Trunking: On

Access Mode VLAN: 1 (default)

Trunking Native Mode VLAN: 1 (default)

Administrative Native VLAN tagging: enabled

Voice VLAN: none

Administrative private-vlan host-association: none

Administrative private-vlan mapping: none

Administrative private-vlan trunk native VLAN: none

Administrative private-vlan trunk Native VLAN tagging: enabled

Administrative private-vlan trunk encapsulation: dot1q

Administrative private-vlan trunk normal VLANs: none

Administrative private-vlan trunk private VLANs: none

Operational private-vlan: none

Trunking VLANs Enabled: 1,10,20,30,40,55,60,100,999

Pruning VLANs Enabled: 2-1001

Capture Mode Disabled

Capture VLANs Allowed: ALL

Unknown unicast blocked: disabled

Unknown multicast blocked: disabled

Appliance trust: none

 

cat3550-2#d show int fa0/23 switchport

Name: Fa0/23

Switchport: Enabled

Administrative Mode: trunk

Operational Mode: down (suspended member of bundle Po1)

Administrative Trunking Encapsulation: dot1q

Negotiation of Trunking: On

Access Mode VLAN: 1 (default)

Trunking Native Mode VLAN: 1 (default)

Administrative Native VLAN tagging: enabled

Voice VLAN: none

Administrative private-vlan host-association: none

Administrative private-vlan mapping: none

Administrative private-vlan trunk native VLAN: none

Administrative private-vlan trunk Native VLAN tagging: enabled

Administrative private-vlan trunk encapsulation: dot1q

Administrative private-vlan trunk normal VLANs: none

Administrative private-vlan trunk private VLANs: none

Operational private-vlan: none

Trunking VLANs Enabled: 1,10,20,30,40,55,60,100,999

Pruning VLANs Enabled: 2-1001

Capture Mode Disabled

Capture VLANs Allowed: ALL

Unknown unicast blocked: disabled

Unknown multicast blocked: disabled

Appliance trust: none

 

cat3550-2#show int fa0/24 switchport

Name: Fa0/24

Switchport: Enabled

Administrative Mode: trunk

Operational Mode: down (suspended member of bundle Po1)

Administrative Trunking Encapsulation: dot1q

Negotiation of Trunking: On

Access Mode VLAN: 1 (default)

Trunking Native Mode VLAN: 1 (default)

Administrative Native VLAN tagging: enabled

Voice VLAN: none

Administrative private-vlan host-association: none

Administrative private-vlan mapping: none

Administrative private-vlan trunk native VLAN: none

Administrative private-vlan trunk Native VLAN tagging: enabled

Administrative private-vlan trunk encapsulation: dot1q

Administrative private-vlan trunk normal VLANs: none

Administrative private-vlan trunk private VLANs: none

Operational private-vlan: none

Trunking VLANs Enabled: 1,10,20,30,40,55,60,100,999

Pruning VLANs Enabled: 2-1001

Capture Mode Disabled

Capture VLANs Allowed: ALL

 

 

  _____

From: Jerzy Szczypien [mailto:jerrysz@telusplanet.net]
Sent: Monday, October 23, 2006 7:55 PM
To: ccielab@groupstudy.org
Subject: lab 2 ipexpert switch config

 

Hi :

I am new to ccielab list. I am working on dual Catalyst 3550 switch
configuration section from Ipexpert.

 

When I tried to restrict vlans across trunk link.

 

Int range fa0/23 - 24 , po1

Switchport trunk allowed vlans 1,10,20, 30,40,55,60,100

 

I got a message,

Fa0/23 is not compatible with Fa0/24 and will be suspended ( vlan mask is
different ).

 

 

Please help.

 

Jerzy

 

 

  _____

From: Gavin Lawson [mailto:GavinL@titan.net.au]
Sent: Monday, October 23, 2006 8:14 PM
To: Jerzy Szczypien; ccielab@groupstudy.com
Subject: RE: dual catalys switch configuration

 

Can you give the config of Fa0/23 and fa0/24 of both switches?

 

It looks like the ports can not become an EtherChannel because they are
different?

 

GL

 

 

  _____

From: nobody@groupstudy.com on behalf of Jerzy Szczypien
Sent: Tue 24/10/2006 9:59 AM
To: ccielab@groupstudy.com
Subject: dual catalys switch configuration

Hi :

I am new to ccielab list. I am working on dual Catalyst 3550 switch
configuration section from Ipexpert.

When I tried to restrict vlans across trunk link.

Int range fa0/23 - 24 , po1

Switchport trunk allowed vlans 1,10,20, 30,40,55,60,100

I got a message,

Fa0/23 is not compatible with Fa0/24 and will be suspended ( vlan mask is
different ).

Please help.

Jerzy



This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:06 ART