From: Ivan (ivan@iip.net)
Date: Sun Oct 22 2006 - 02:35:46 ART
use "standby use-bia" keyword to point router use burned-in MAC-address for
HSRP-virtual MAC-address.
On Saturday 21 October 2006 23:02, Ricky MK Au wrote:
> Dear all,
>
> I have the following problem in configuring port-security on a VLAN 13 with
> (R1-e0/0 on switch port fa0/3) and (R2-fa0/0 on switch port fa0/4) and an
> HSRP interfaces for R1-e0/0 and R2-fa0/0. While R1-e0/0 is the primary
> interface unless it lost it's connection to the WAN interface.
>
> I have configured port-security with the mad address of R1-e0/0 and
> R2-fa0/0 in the corresponding their corresponding switch ports. However, it
> display a message with duplicate mac address detected.
>
> Is anyone can tell me what is the corresponding step in setting port
> security to allow only the two allowed routers to plug in the switch ports
> with HSRP enabled for that VLAN?
>
> Ricky M.K. Au,
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
-- Ivan
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:06 ART