From: David Mitchell (david.mitchell@centientnetworks.com)
Date: Sat Oct 21 2006 - 18:35:40 ART
If you're using IDS 4.1 you can use the IDM to do this. Under the
Configuration Tab, select "Restore Defaults".
It give you the following waring:
"Warning! This will restore the current application settings to the
default settings. This will cause your network settings to return to
defaults as well and lose immediate connection to IDM and CLI."
I'm not sure if there's a CLI command to this, as I rarely use the CLI
past the initial config.
- Dave
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Stefan Grey
Sent: Saturday, October 21, 2006 5:22 PM
To: ccielab@groupstudy.com
Subject: Clear config on IDS??
Guys probably this is very ease question but...
HOw can I completely clear the config on the IDS?? When I use erase
current-config commands it erases all my signature tunings but network
config and some other still remain. Is this possible to clear it somehow
automatically or I should change this only manually??
Thanks
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:06 ART