From: Liu_Liao (liu_liao@yahoo.com.tw)
Date: Sat Oct 21 2006 - 12:52:01 ART
Hi All
If I don't want use auto-summary or ip summary-address?
How to do
Tks!
WorkerBee fe0:
> You should use the interface command to do RIP summarization:
>
> interface E0/0
> ip summary-address rip 172.16.0.0 255.255.0.0
>
>
>
> On 10/21/06, liu_liao@yahoo.com.tw <liu_liao@yahoo.com.tw> wrote:
>
>> Hi All
>> I want update one classB to R3 by the RIP.
>> R1 <--> R2 (RIP version2)
>> router rip
>> version 2
>> network 192.168.100.0
>> distribute-list prefix only_classB_2_R2 out Ethernet0/0
>> no auto-summary
>> !
>> ip prefix-list only_classB_2_R2 seq 10 permit 172.16.0.0/16
>>
>> I can't see any rip update on R2,but I remove the distribute-list
>> then the rip update ok.
>>
>> Debug messages
>> 04:33:50: RIP: sending update with long TTL
>> 04:33:50: RIP: sending v2 update to 192.168.100.254 via Ethernet0/0
>> (192.168.100.1)
>> 04:33:50: RIP: build update entries - suppressing null update
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:06 ART