From: cadet (cadet22@gmail.com)
Date: Thu Oct 19 2006 - 16:35:29 ART
Hello GROUP !
I have problem in next situation:
r1---PPPoFR----r2
r1
interface Virtual-Template1
ipv6 address FEC0:0:0:1::1/64
Virtual-Access1 [up/up]
FE80::211:20FF:FE4B:76E0
Virtual-Template1 [down/down]
FE80::211:20FF:FE4B:76E0
FEC0:0:0:1::1
Virtual-Access2 [down/down]
unassigned
R2
interface Virtual-Template1
ipv6 address FEC0:0:0:1::2/64
sh ipv6 int brief
Virtual-Access1 [up/up]
FE80::211:20FF:FE4B:6F00
Virtual-Template1 [down/down]
FE80::211:20FF:FE4B:6F00
FEC0:0:0:1::2
Virtual-Access2 [down/down]
unassigned
I have not connectivity:
r2#ping FEC0:0:0:1::1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to FEC0:0:0:1::1, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
Where is problem ?
Thank you. Max.
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:06 ART