From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Wed Oct 18 2006 - 09:48:45 ART
Did you issue the "ipv6 unicast-routing" command in global
config? As long as routing is on and you have an IPv6 address assigned
to the interface ICMP ND will send RAs on the interface for stateless
autoconfig. "debug ipv6 nd" if it's not working and see what the router
shows.
HTH,
Brian McGahan, CCIE #8593 (R&S/SP)
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> haducbinh
> Sent: Wednesday, October 18, 2006 4:41 AM
> To: 'srdja blagojevic'; ccielab@groupstudy.com
> Subject: RE: IPV6 autoconfiguration on PC
>
> Hi srdja!
>
> Windown xp do not allow statefull autoconfiguration for IPV6:
> - stateless: router does not use DHCP to assign Ipv6 for PC, window
xp
> support this mode
> - statefull: router uses DHCP to assign Ipv6 for PC, window xp does
not
> support this mode
>
> So I still confuse how to enable stateless autoconfig ipv6 address for
pc
> running window xp!
>
> Anyway thank you so much srdja!
>
> HaDucBinh
> Mail: haducbinh@vnpro.org or haducbinh@yahoo.com
> Phone: 0908 191 322
>
------------------------------------------------------------------------
-- > -- > -------- > Vietnamese Professionals (VnPro) > Cisco Authorised Training > 149/1D Ung Van Khiem Street, Ward 25, Binh Thanh District, Ho Chi Minh > City. > Tel: (08) 5124257 - (08) 5125314 > Fax: (08) 5124314 > Website: http://vnpro.vn > Support forum: http://vnpro.org > > -----Original Message----- > From: srdja blagojevic [mailto:srdja1@pexim.co.yu] > Sent: Wednesday, October 18, 2006 4:30 PM > To: 'haducbinh'; ccielab@groupstudy.com > Subject: RE: IPV6 autoconfiguration on PC > > > HaDucBinh, > > you should configure router advertisement (RA) options. > > Here is good link about it: > > http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/ ip > v6 > _c/v6_dhcp.htm > > "The Cisco IOS DHCP for IPv6 client will invoke stateless DHCP for IPv6 > when it receives an appropriate RA. The Cisco IOS DHCP for IPv6 server > will > respond to a stateless DHCP for IPv6 request with the appropriate > configuration parameters, such as the DNS servers and domain search list > options." > > hth, > Srdja > > -----Original Message----- > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of > haducbinh > Sent: Wednesday, October 18, 2006 11:06 > To: ccielab@groupstudy.com > Subject: IPV6 autoconfiguration on PC > > Hi GS! > > > > My topology is: ROUTER(fast0/0) ------------ PC > > I configuration IPV6 address: 2001::1/64 for fas0/0 and plug my PC(run > windown XP SP2) into fas0/0 and install IPV6 protocol for my PC! But my PC > can not get the IPV6 address via stateless autoconfiguration! > > > > Please show me what I am wrong!? > > > > Thanks! > > > > HaDucBinh > > Mail: haducbinh@vnpro.org or haducbinh@yahoo.com > > Phone: 0908 191 322 > > ------------------------------------------------------------------------ -- > -- > -------- > Vietnamese Professionals (VnPro) > > Cisco Authorised Training > 149/1D Ung Van Khiem Street, Ward 25, Binh Thanh District, Ho Chi Minh > City. > Tel: (08) 5124257 - (08) 5125314 > Fax: (08) 5124314 > Website: <http://vnpro.vn> http://vnpro.vn Support forum: > <http://vnpro.org> http://vnpro.org > >
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:05 ART