From: srdja blagojevic (srdja1@pexim.co.yu)
Date: Wed Oct 18 2006 - 06:30:10 ART
HaDucBinh,
you should configure router advertisement (RA) options.
Here is good link about it:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/ipv6
_c/v6_dhcp.htm
"The Cisco IOS DHCP for IPv6 client will invoke stateless DHCP for IPv6
when it receives an appropriate RA. The Cisco IOS DHCP for IPv6 server will
respond to a stateless DHCP for IPv6 request with the appropriate
configuration parameters, such as the DNS servers and domain search list
options."
hth,
Srdja
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
haducbinh
Sent: Wednesday, October 18, 2006 11:06
To: ccielab@groupstudy.com
Subject: IPV6 autoconfiguration on PC
Hi GS!
My topology is: ROUTER(fast0/0) ------------ PC
I configuration IPV6 address: 2001::1/64 for fas0/0 and plug my PC(run
windown XP SP2) into fas0/0 and install IPV6 protocol for my PC! But my PC
can not get the IPV6 address via stateless autoconfiguration!
Please show me what I am wrong!?
Thanks!
HaDucBinh
Mail: haducbinh@vnpro.org or haducbinh@yahoo.com
Phone: 0908 191 322
----------------------------------------------------------------------------
--------
Vietnamese Professionals (VnPro)
Cisco Authorised Training
149/1D Ung Van Khiem Street, Ward 25, Binh Thanh District, Ho Chi Minh City.
Tel: (08) 5124257 - (08) 5125314
Fax: (08) 5124314
Website: <http://vnpro.vn> http://vnpro.vn Support forum:
<http://vnpro.org> http://vnpro.org
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:05 ART