From: Cagri Yucel (cyucel@gmail.com)
Date: Fri Oct 13 2006 - 03:16:27 ART
Please remember an important part of CCIE study is to explore Doc CD :)
set dscp
Command History Release
Modification
12.2(13)T
This command was introduced. This command replaces the *set ip dscp*command.
On 10/13/06, Group Study <www.tranhonghoang.cisco@gmail.com> wrote:
>
> Dear Group !!!
>
> BB2--> R3 --->R4--->BB3
> Request deny transit between BB2 & BB3 . Configure the network so that
> any traffic enters R3's interface f0/0 can not exit via R4's f0/0
> interface . Do not use route filtering .
> Solution :
>
> R3 & R4
> class-map match-all DSCP-63
> match ip dscp 63
> !
> !
> policy-map DROP
> class DSCP-63
> drop
> policy-map MARK
> class class-default
> set dscp 63
>
> interface f0/0
> service-policy input MARK
> service-policy output DROP
> I'm confuse about command : set dscp 63 and set ip dscp 63 , is there
> any difference ???
>
> Thanks
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- -cagri
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:05 ART