From: Kemal YILDIRIM (kemalhy@gmail.com)
Date: Fri Oct 13 2006 - 03:06:41 ART
I am just guessing that you did not make redistribution at R2 :-) , to
suffice the redistributed EIGRP routes reachability.
R4 is used as a backup, so there is no problem with it, but R2 and R3
mutually redistributing btw OSPF and EIGRP, so they will use each other to
reach EIGRP routes.
In this situation you can't reach VLAN6 from R2. Try to check the
reachability with a TCL script before continue after finishing IGP part.
HTH
Kemal
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Grabler, Ross (IT)
Sent: Thursday, October 12, 2006 11:12 PM
To: Cisco certification
Subject: Question in IEWB-RS V 1 Lab2
Guys,
May be you can help me out,
In WB V1 Lab2, Task 4.11.
Is asking to mutually redistribute b/w ospf and eigrp on R3 and R4.
Solution of the lab changes to admin distance of the external routes to
171 (higher than External Eigrp).
But I don't see a reason to change the AD. Everything should work fine with
default settings.
What am I missing?
Thanks for your help in advance.
--------------------------------------------------------
NOTICE: If received in error, please destroy and notify sender. Sender does
not intend to waive confidentiality or privilege. Use of this email is
prohibited when received in error.
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:05 ART