From: prathap singh (cprathap1982@yahoo.co.in)
Date: Thu Oct 12 2006 - 06:16:22 ART
Thanks, if i get some more specific idea about Qos with etherchannel , will be very usefull.
Alexei Monastyrnyi <alexeim@orcsoftware.com> wrote: Hi.
Neither 3560 nor 3750 switches allow (show) mls qos commands on
port-channel interface... there is a "switchport priority extend... "
one, but is it actually rejected.
SW1(config)#in port-channel 1
SW1(config-if)#switchport priority extend tru
Command rejected: Extend trust cannot be configured on an etherchannel
Applying this on physical interfaces forming the channel takes the
channel down, which is fair enough.
SW1(config-if)#in range gi 1/0/13 - 14
SW1(config-if-range)#switchport priority extend tru
SW1(config-if-range)#
1w4d: %EC-5-UNSUITABLE: Gi1/0/13 will not join any port-channel, Access
port with voice VLAN configured cannot be part of an etherchannel
1w4d: %EC-5-UNSUITABLE: Gi1/0/14 will not join any port-channel, Access
port with voice VLAN configured cannot be part of an etherchannel
SW1(config-if-range)#
1w4d: %LINEPROTO-5-UPDOWN: Line protocol on Interface Port-channel1,
changed state to down
1w4d: %LINK-3-UPDOWN: Interface Port-channel1, changed state to down
HTH
A.
prathap singh wrote:
> Hi All,
>
> How to apply Qos in case of Etherchannel configuration.Whether it should be applied to physical / logical interface.
>
> Thanks in Advance,
> Prathap.c
>
>
>
>
> ---------------------------------
> Find out what India is talking about on - Yahoo! Answers India
> Send FREE SMS to your friend's mobile from Yahoo! Messenger Version 8. Get it NOW
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:05 ART