From: Radoslav Vasilev (deckland@gmail.com)
Date: Tue Oct 10 2006 - 12:20:11 ART
Hi,
Fallback bridging works only for non-routed protocols, not IP.
<doccd>
this chapter describes how to configure fallback bridging (VLAN
bridging) on your Catalyst 3550 switch. With fallback bridging, you
can forward non-IP packets that the switch does not route between VLAN
bridge domains and routed ports.
</doccd>
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12225see/scg/swfallbk.htm
-rado
On 10/10/06, Naveed Khan <naveed_k@hotmail.com> wrote:
> Hi,
> Fallback bridge doesn't work. I configure a virtual interface and routed port.
>
> -----------------------------------------------------------------------------
> ----------------------------------
> interface Vlan11
> ip address 2.2.10.7 255.255.255.0
> bridge-group 1
> !
> bridge 1 protocol vlan-bridge
> !
> int fa0/2
> no sw
> bridge-group 1
> !
> Rack1R2(config)#int e0/0
> Rack1R2(config-if)#ip add 2.2.10.2 255.255.255.0
>
>
> Rack1SW1#sh bridge
> Br Group Mac Address State Type Ports
> -------- ----------- ----- ---- -----
> 1 0007.856c.48c0 Forward DYNAMIC Fa0/2
> -----------------------------------------------------------------------------
> ---------------------------------
>
> when I try to ping ip each other no reply comes. pls let me know where I am
> doing mistake.
>
> Naveed
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:04 ART