From: Dusty (dustygoody@gmail.com)
Date: Mon Oct 09 2006 - 19:58:30 ART
Yeah...These links are good. Basically, dial-peer with no restriction will
provide for both incomming and outgoing call. That is why you will ned
called-number, destination pattern, and so forth... each of these commands
has its own precedence of one over the other.
Dusty
On 10/9/06, Hooman Parta <hooman@voipsol.com> wrote:
>
> Thomas,
>
> Check the following links. They explain it all.
>
>
> http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a008010ae1c.shtml
>
>
> http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080147524.shtml
>
> HTH,
> Hooman Parta
>
> Thomas wrote:
>
> Hi All,
>
> In a book I read the following description under a section "Matching
> Inbound
> Dial Peer":
> 1. Inbound POTS dial peers are associated with the incoming POTS call legs
> of
> the originating router or gateway.
> 2. inbound VOIP dial peers are associated with the incoming VOIP call legs
> of
> the terminating router or gateway.
>
> I don't understand their meaning and how they are related to the sequence
> matching inbound dial peer: incoming called-no, answer address and
> destination
> pattern?
>
> Please help to explain.
>
> Thank you very much.
>
> Regards,
>
> Thomas
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:04 ART