From: Chris Broadway (midatlanticnet@gmail.com)
Date: Thu Oct 05 2006 - 21:35:21 ART
Max-reserve is used if you are going over the 75% default...for example, if
you wanted to use and make a policy for 90% of your total bandwidth you
would type max-reserve 90.
-Broadway
On 10/5/06, Alex De Gruiter (AU) <Alex.deGruiter@didata.com.au> wrote:
>
> Hey Guys,
>
> I have a question - I searched the archives and found a similar
> reference, however I wasn't satisfied that the answer was definitively
> defined.
>
> If a question in the lab asks us to use CBWFQ in such a way as to
> provide the following bandwidth allocations:
>
> Class A : 20%
> Class B : 40%
> Class C : 30%
>
> Then, distribute the remaining bandwidth among other classes, do we need
> to modify the max-reserved-bandwidth? I tried this in my home lab and
> received an error relating to the bandwidth available (which, by
> default, is 75%).
>
> What does everyone think? When would we need to change
> max-reserved-bandwidth?
>
> Alex
>
>
> ******************************************************************************
> - NOTICE FROM DIMENSION DATA AUSTRALIA
> This message is confidential, and may contain proprietary or legally
> privileged information. If you have received this email in error, please
> notify the sender and delete it immediately.
>
> Internet communications are not secure. You should scan this message and
> any attachments for viruses. Under no circumstances do we accept liability
> for any loss or damage which may result from your receipt of this message or
> any attachments.
>
> ******************************************************************************
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:04 ART