From: Church, Chuck (cchurch@multimax.com)
Date: Thu Oct 05 2006 - 15:01:28 ART
Try changing the flow control on the com port. 'None' works for mine.
Chuck Church
Network Engineer
CCIE #8776, MCNE, MCSE
Multimax, Inc.
Enterprise Network Engineering
Home Office - 864-335-9473
Cell - 864-266-3978
cchurch@multimax.com
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of CCIE
> Sent: Thursday, October 05, 2006 1:33 PM
> To: ccielab@groupstudy.com
> Subject: Console support on 2501
>
> Good afternoon:
>
> I have an interesting problem. An older 2501 can be
> configured via a terminal cable on a 2511 or 2509.
>
> When I plug a console cable directly into the console port
> from a PC into the 2501, I can see the startup, but am unable
> to access the router. No keyboard functionality.
>
> This is only happening with one of my routers any suggestions?
>
> George Morton, Ph. D.
>
> ______________________________________________________________
> _________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:04 ART