From: Gavin Lawson (GavinL@titan.net.au)
Date: Tue Oct 03 2006 - 07:33:24 ART
Hi Mohamed
With your example there are 2 software based Priority Queue's
The CLASS1 priority Queue will be serviced first and then CLASS2
GL
________________________________
From: nobody@groupstudy.com on behalf of Mohamed Saeed
Sent: Tue 3/10/2006 5:39 PM
To: ccielab@groupstudy.com
Subject: RE: LLQ Question - Multiple Traffic Classes in the Priority Queue
Hi GL,
Let me state an example to clarify my point:
policy-map TEST
class CLASS1
priority 100
class CLASS2
priority 200
With this setup, traffic of both CLASS1 and CLASS2 will be assigned to
the priority queue. So, how will the router assign max BW of 100 to
traffic of CLASS1 and assign max BW of 200 to traffic of CLASS2 although
they are both in the same single queue and should be treated as FIFO.
Regards
Mohamed Saeed, CCNP - CCIP
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Gavin Lawson
Sent: Tuesday, October 03, 2006 11:23 AM
To: ccielab@groupstudy.com
Subject: RE: LLQ Question - Multiple Traffic Classes in the Priority
Queue
HI Mohamed
The priority queue will be serviced in a FIFO manner, no matter what the
markings are of the packets in the queue.
GL
________________________________
From: nobody@groupstudy.com on behalf of Mohamed Saeed
Sent: Tue 3/10/2006 4:57 PM
To: ccielab@groupstudy.com
Subject: LLQ Question - Multiple Traffic Classes in the Priority Queue
Hi All,
It is a fact that you can assign multiple traffic classes to the
priority queue in the same policy map. All traffic from these classes is
queued to the same, single, priority queue.
I am a little bit confused, how will the system police different traffic
classes to different rates although they are in the same priority queue.
Does anyone has an idea?
Regards
Mohamed Saeed, CCNP - CCIP
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:04 ART