From: Kian Seng Goh (kianseng.goh@gmail.com)
Date: Wed Sep 27 2006 - 23:21:45 ART
thanks...
anyway, when i refer to the Routing TCP/IP vol 1...
i have a impression that when i have multiple redistribution line in the
same routing process
if there's any conflict... it will select based on the lowest administrative
distance value rite ?
or am i interpret the book wrongly..
On 9/24/06, Brian Dennis <bdennis@internetworkexpert.com> wrote:
>
> This is normal behaviour. Redistribution between routing processes is
> two steps:
>
> 1) Bring in the routes from the routing table for the protocol being
> redistributed from.
>
> *** In your case these will be the EIGRP routes in the table table. You
> can see these by doing a "show ip route eigrp".
>
> 2) Bring in the connected interfaces that the protocol is enabled on.
>
> *** These are the connected interfaces that are encompassed by the EIGRP
> network statements.
>
> When you redistributed connected "manually" with a route-map you broke
> step two that the router did automatically for the EIGRP redistribution.
> Your redistributed connected route-map needs to include the connected
> routes that are being brought in through the EIGRP redistribution.
>
> HTH,
>
> Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
> bdennis@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987
> Direct: 775-745-6404 (Outside the US and Canada)
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Kian Seng Goh
> Sent: Saturday, September 23, 2006 6:17 PM
> To: ccielab@groupstudy.com
> Subject: Route Redistribution into ospf
>
> My config as below :-
>
>
> router ospf 100
> redistribute connected metric 2 subnets route-map Connected2OSPF
> redistribute eigrp 10 metric 2 subnets tag 170
>
>
> What i notice is...
> my EIGRP route doesn't get redistributed...whenever i do a
> redistribute connected...
>
> when i removed the redistributed connected line.. it works fine...
> is this the normal behavior ? or i'm only allow to use the
> redistribute command only once ?
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:41 ART