From: Dan C (cdan2154@gmail.com)
Date: Mon Sep 25 2006 - 02:31:48 ART
Hello there,
First of all you need to send the router into rommon mode, pls follow the
instructions from this page:
http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a0080174a34.shtml
Once you are in the rommon mode issue the following commands:
rmon>meminfo ---- to check if your main memory is ok
dev -------------- to see which device is holding an IOS
dir flash: ------------ if you see a valid image in here with no
magic error messages try this
confreg 0x2142
reset or i to initialise
if still ending up in rommon try:
rommon>boot flash:<image name no space between : >
If all fails capture all the errors and unicast them to me.
Cheers, Dan
On 9/25/06, duylh <duylh@ipmac.com.vn> wrote:
>
> Hello group,
>
> Pls help me with this trouble.
>
>
>
> Cisco 3624 router stucks in this state:
>
>
>
> System Bootstrap, Version 11.1(19)AA, EARLY DEPLOYMENT RELEASE SOFTWARE
> (fc1)
>
> Copyright (c) 1998 by cisco Systems, Inc.
>
>
>
> It loops in that state like forever. I can't even use Ctrl-Break to switch
> to ROMMON mode.
>
> This router has 64MB RAM and 16MB Flash.
>
>
>
> I'd appriciate your help.
>
>
>
> Best regards !
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:41 ART