From: Fabio Rodrigues (fleandror2@gmail.com)
Date: Sun Sep 24 2006 - 12:47:11 ART
Hi Brian,
tks very much for the response. The test works. Now..., I'm sorry for the
insistence, but in the situation that I said below, without rotary command
and without select just one line, Would have the "refuse-message" command
shows a message when the router have five incoming telnet sessions opened to
it and a sixth attempt is in course ?
Tks again.
Fabio.
----- Original Message -----
From: "Brian Dennis" <bdennis@internetworkexpert.com>
To: "Fabio Rodrigues" <fleandror2@gmail.com>; <ccielab@groupstudy.com>
Sent: Sunday, September 24, 2006 12:12 PM
Subject: RE: "Refuse-message" command to refuse
> It may help to configure one VTY line under a rotary group so that
> particular VTY line will answer to an additional port number on top of
> port 23 (i.e. rotary 1 = 3001 and 7001). This will make testing easier.
>
> Rack1R1#conf t
> Enter configuration commands, one per line. End with CNTL/Z.
> Rack1R1(config)#line vty 4
> Rack1R1(config-line)#rotary 1
> Rack1R1(config-line)#refuse-message %
> Enter TEXT message. End with the character '%'.
>
> THIS IS MY REFUSE MESSAGE
>
> %
> Rack1R1(config-line)#^Z
> Rack1R1#
> %SYS-5-CONFIG_I: Configured from console by console
> Rack1R1#
> Rack1R1#telnet 150.1.1.1 7001
> Trying 150.1.1.1, 7001 ... Open
>
> Rack1R1#telnet 150.1.1.1 7001
> Trying 150.1.1.1, 7001 ... Open
>
>
> THIS IS MY REFUSE MESSAGE
>
>
> [Connection to 150.1.1.1 closed by foreign host]
> Rack1R1#
>
>
> HTH,
>
> Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
> bdennis@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987
> Direct: 775-745-6404 (Outside the US and Canada)
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Fabio Rodrigues
> Sent: Sunday, September 24, 2006 7:51 AM
> To: ccielab@groupstudy.com
> Subject: "Refuse-message" command to refuse
>
> Hi all,
>
> I tried to use the "refuse-message" command in Line VTY 0 4, to test the
> message. I opened 5 sessions from other routers to a same router and,
> when I
> tried to open the sixth session I didn't receive the message that I
> configured. The test is simple like I'm saying.
>
> Does anyone knows for what reason this occurs ?
> Does the purpose of this command is to send a refuse message in this
> kind of
> situation, or my understanding about the command isn't ok ?
>
> Tks !
>
> Fabio.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:41 ART