From: Tony Paterra (apaterra@gmail.com)
Date: Wed Sep 20 2006 - 21:24:39 ART
All,
I was playing around with NTP and I noticed the following behavior
when synching to a backbone router...
When I take my client and set him up to use the BB router as a master,
I am only able to get my router to synch if I do not change his source
interface. There are no access-groups set on the master/server and I
can see traffic being sent through the debugs (but no synch happens).
Config 1 works, Config 2 doesn't (and I definitely left a lot of time
in each test case for it to synch)... Any thoughts?
Backbone config
------------------------
ntp authentication-key 1 md5 106D202A2638 7
ntp master 4
Config 1
-----------
ntp authentication-key 1 md5 05282F3C0263 7
ntp authenticate
ntp trusted-key 1
ntp clock-period 17179925
ntp server 204.12.1.254 key 1
Config 2
-----------
ntp authentication-key 1 md5 05282F3C0263 7
ntp authenticate
ntp trusted-key 1
ntp clock-period 17179925
ntp server 204.12.1.254 key 1
ntp source Loopback0
-- Tony Paterra apaterra@gmail.com
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:41 ART