From: Radoslav Vasilev (deckland@gmail.com)
Date: Mon Sep 18 2006 - 18:16:40 ART
Hi Group,
Recently came across a scenario with PPPoFR over a single PVC, with some
FRTS tuning (to conform to CIR or any other reason)
Additionally legacy priority-list had to be enabled for that PVC.
Something like this:
int se 0/0
[...]
frame-relay interface-dlci xxx ppp virtual-template 1
class dlci_xxx
frame-relay traffic-shaping
map-class frame-relay dlci_xxx
frame-relay cir ...
frame-relay bc
[...]
priority-group 1
In the vendor's solution the priority group was applied in the dlci
frame-relay class as shown above.
The configuration is accepted by IOS, but my question is: will this actually
take effect as PPP is run over the DLCI and I'm not sure
that the priority group will be able to classify the traffic. should this be
enabled on the virtual-interface instead ?
thanks,
Rado
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:40 ART