From: sabrina pittarel (sabri_esame@yahoo.com)
Date: Sun Sep 17 2006 - 14:12:00 ART
They are all correct. I'm sure the lab task wording will drive you toward one or the other option.
As long as you know all the ways of making it working you are fine.
Sabrina
----- Original Message ----
From: Peter Cresswell <p-cresswell@iname.com>
To: ccielab@groupstudy.com
Sent: Sunday, September 17, 2006 9:28:03 AM
Subject: OSPF FR adjacency question
Hello all,
I'm sure this question comes up all the time, but i've had a quick look
through the archive and could find a previous posting.
I'd like your opinion on the following scenario (hub & spoke over FR, single
subnet):
Hub
/ \
/ \
Spoke1 Spoke2
- Hub has point-to-multipoint interface (in both ospf and FR and has FR
broadcast to spokes)
- Spokes have point-to-point interfaces (in both ospf and FR and has
interface-dlci to hub)
By default this configuration will not build an adjacency because of
different hello timers. Which of the following solutions (or others if you
have them) do you think is the "prefered" way to set up OSPF adjancencies in
this scenario?
1. Change hello time on both spokes to 30 secs.
2. Change hello time on hub to 10 secs.
3. Change the ospf network type on spokes to point-to-multipoint
Thanks,
Peter
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:40 ART