Re: IEWB - V1 Lab 14 Task 4.5

From: Fabio Rodrigues (fleandror2@gmail.com)
Date: Fri Sep 15 2006 - 18:06:39 ART

Victor,

look the session "Ethernet MAC Address Mapping" in the URL:

http://www.cisco.com/en/US/customer/tech/tk828/technologies_white_paper09186a00800d6b5e.shtml#xtocid9

Tks,

Fabio.
----- Original Message -----
From: "Victor Cappuccio" <cvictor@protokolgroup.com>
To: "'Brian Dennis'" <bdennis@internetworkexpert.com>
Cc: <ccielab@groupstudy.com>
Sent: Friday, September 15, 2006 5:29 PM
Subject: RE: IEWB - V1 Lab 14 Task 4.5

> Hi Brian,
>
> Please can you let me know how to calculate that EIGRP Multicast Mac
> address
> using the routers and the switch?
>
> I've tried this,
>
> R6(config-if)#ip igmp join-group 224.0.0.10
> Illegal multicast group address
> R6(config-if)#ip igmp join-group 224.0.1.10
> R6(config-if)#do ping 224.0.1.10
>
> Type escape sequence to abort.
> Sending 1, 100-byte ICMP Echos to 224.0.1.10, timeout is 2 seconds:
> Reply to request 0 from 192.168.0.6, 4 ms
> R6(config-if)#
> BB1-TS#7
> [Resuming connection 7 to sw1 ... ]
>
> Sw1#show mac-address-table multicast
> Vlan Mac Address Type Ports
> ---- ----------- ---- -----
> 63 0100.5e00.010a IGMP Fa0/6
>
> Sw1#0100.5e00.000a <<< EIGRP Multicast Mac 224.0.0.10
>
> Many thanks
> Victor.-
>
>
>
> -----Mensaje original-----
> De: nobody@groupstudy.com [mailto:nobody@groupstudy.com] En nombre de
> Fabio
> Rodrigues
> Enviado el: Viernes, 15 de Septiembre de 2006 02:38 p.m.
> Para: Brian Dennis
> CC: ccielab@groupstudy.com
> Asunto: Re: IEWB - V1 Lab 14 Task 4.5
>
> Brian,
>
> Done ! Tks a lot. But, here I have 2 switches (3560 and 3550). The switch
> that I used to this lab was the 3560 (where i didn't find the "IGMP
> Snooping" message). I tested in the 3550 and saw the message.
>
> Tks again.
>
> Fabio.
>
>
> ----- Original Message -----
> From: "Brian Dennis" <bdennis@internetworkexpert.com>
> To: "Fabio Rodrigues" <fleandror2@gmail.com>; <ccielab@groupstudy.com>
> Sent: Friday, September 15, 2006 3:19 PM
> Subject: RE: IEWB - V1 Lab 14 Task 4.5
>
>
> See below:
>
> Rack1SW1(config)#
> Rack1SW1(config)#mac-address-table static 0100.5e00.000a vlan 1363
> interface FastEthernet0/1
> IGMP Snooping or MVR enabled on vlan 1363. Can't add static multicast
> addresses.
> Rack1SW1(config)#no ip igmp snooping vlan 1363
> Rack1SW1(config)#mac-address-table static 0100.5e00.000a vlan 1363
> interface FastEthernet0/1
> Rack1SW1(config)#
>
>
> Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
> bdennis@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987
> Direct: 775-745-6404 (Outside the US and Canada)
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Fabio Rodrigues
> Sent: Friday, September 15, 2006 10:01 AM
> To: ccielab@groupstudy.com
> Subject: IEWB - V1 Lab 14 Task 4.5
>
> Hi All,
>
> Does anyone knows why in the Solution Guide they used the "no ip igmp
> snooping 1363" command ?
>
> Tks,
>
> Fabio.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:40 ART