From: Ivan (ivan@iip.net)
Date: Thu Sep 14 2006 - 07:30:35 ART
Giga-M9(config)#class-map match-all RTComm2
Giga-M9(config-cmap)#mat
Giga-M9(config-cmap)#match ?
access-group Access group
input-interface Select one or more input interfaces to match
ip IP specific values
Giga-M9(config-cmap)#do sh ver | inc IOS
Cisco IOS Software, C3560 Software (C3560-ADVIPSERVICESK9-M), Version 12.2
(25)SEE, RELEASE SOFTWARE (fc2)
----------------------------------------------------------
Giga-TCSS#sh class-map VLAN_950
Class Map match-all VLAN_950 (id 3)
Match vlan 950
Match class-map ANY
Giga-TCSS#sh ver | inc IOS
Cisco IOS Software, C3550 Software (C3550-IPSERVICES-M), Version 12.2(25)SED,
RELEASE SOFTWARE (fc1)
On Thursday 14 September 2006 14:02, Victor Cappuccio wrote:
> Mine does..
>
> Sw1(config-if)#class-map match-all VLAN
> Sw1(config-cmap)#match ?
> access-group Access group
> class-map Class map
> flow Flow based QoS parameters
> ip IP specific values
> vlan VLANs to match
>
> Sw1(config-cmap)#do show ver | in IOS
> Cisco IOS Software, C3550 Software (C3550-I5Q3L2-M), Version 12.2(25)SE,
> RELEASE SOFTWARE (fc)
> Sw1(config-cmap)#do show ver | in memory
> Cisco WS-C3550-24 (PowerPC) processor (revision G0) with 65526K/8192K bytes
> of memory.
>
> -----Mensaje original-----
> De: nobody@groupstudy.com [mailto:nobody@groupstudy.com] En nombre de
> nikolai
> Enviado el: Jueves, 14 de Septiembre de 2006 05:27 a.m.
> Para: Chee Chew Leong
> CC: ccielab@groupstudy.com
> Asunto: Re: per-port per-vlan on 3560
>
> Chee Chew Leong wrote:
> >>From the configuration guide and command reference, it don't seem the
> >> 3560
> >
> > switch is doing per-port per-vlan anymore. This means, this command Nov,
> > this feature will be taken out from lab.
> >
> > I need the your comments, so that I am more sure on my finding.
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> I agree - the 3560 (12.2.25 SED1) in my lab doesn't support "match vlan"
> under a class-map:
> ************************************
> SW1(config)#class-map match-all VLAN
> SW1(config-cmap)#match ?
> access-group Access group
> input-interface Select one or more input interfaces to match
> ip IP specific values
> ***************************************
> -- nikolai
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
-- Ivan
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:40 ART