From: Ivan (ivan@iip.net)
Date: Thu Sep 14 2006 - 06:38:15 ART
Such as task state "router outside of AS65078". Aggregateaddres is not
suitable to solve this. Apply bgp inect-map only to eBGP peers.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123tcr/123tip2r/ip2_b1gt.htm#wp1081774
> Dear Group,
>
> SW1 and SW2 are in AS 65078
> + Advertise the loopback 0 of SW1 and SW2 into BGP (150.1.7.7, 150.1.8.8)
> + router outside of AS65078 onlysee one route to these prefixes.
>
> Here is the configuaration:
>
> SW2
> router bgp 65078
> no synchronization
> bgp router-id 150.1.8.8
> bgp log-neighbor-changes
> network 150.1.8.0 mask 255.255.255.0
> aggregate-address 150.1.0.0 255.255.240.0
> neighbor 167.1.58.5 remote-as 100
> neighbor 167.1.78.7 remote-as 65078 -> this is SW1
> neighbor 167.1.78.7 next-hop-self
> no auto-summary
>
> The problem is the summary route point to null0 and includes some other
> loopback interfaces (ie: 150.1.3.3, 150.1.4.4...) so after summary, SW1 and
> SW2 can not reach other loopback interfaces. So I don't want the summary
> route in the routing table of SW1 and SW2. Do you have any solution for
> this?
>
> Thanks and best regards,
>
> Tony
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
-- Ivan
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:40 ART