From: Sean C. (Upp_and_Upp@hotmail.com)
Date: Thu Sep 14 2006 - 01:13:37 ART
Hi Dennis,
Very ambiguous question, but it really depends on if you're blocking traffic
from a client to a web server or traffic from the web server to the client.
I'll go out on a verrrrrry long limb, and 'assume' you're blocking traffic
to a web server (TCP port 80) that is from a client. If so, if everything
is 'default', your first choice would be correct.
If you're protecting traffic that is from a web server going to a client,
again assuming the 'defaults', I'd look at solution #2.
Again, the question is so vague, I don't feel comfortable offering a
definitive answer. At the risk of being flamed on this board, I'll at least
offer the above notes.
Hope all is well,
Sean
----- Original Message -----
From: "Dennis Morgan" <dennis3organ@gmail.com>
To: "Cisco certification" <ccielab@groupstudy.com>
Sent: Wednesday, September 13, 2006 12:08 PM
Subject: Web Traffic
Hey Group,
One of the task that I have says that do not permit www traffic in
How this access-list should look like ?
permit tcp any any eq www
or
permit tcp any eq www any
Many thanks for your feedback
Dennis Morgan
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:40 ART