From: Joe Rinehart (jjrinehart@hotmail.com)
Date: Tue Sep 12 2006 - 18:43:55 ART
How does one create multiple routers with this?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Peter Cresswell
Sent: Tuesday, September 12, 2006 1:52 PM
To: 'Ryan'; ccielab@groupstudy.com
Subject: RE: Cisco 7200 Router Simulator for CCIE R&S Lab practice & MPLS
LAB practice
Who created this software? What's it called?
Does anyone have a link to developer's site?
Many thanks,
Peter
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Ryan
Sent: 12 September 2006 21:36
To: ccielab@groupstudy.com
Subject: Re: Cisco 7200 Router Simulator for CCIE R&S Lab practice & MPLS
LAB practice
> If that is the case (can simulate 3550 on 72xx simulator), is there
> still need to buy all expensive LAB equipment?????????
Not really. The 7200 router virtualizer (not really a simulator) is
incrediably flexiable. I've used it to set up full MPLS toplogies with 10
routers among other things. It's really an amazing tool.
You can even map ports to real ethernet ports so you can connect the
virtualized lab to real network devices. So at worst case, you may need to
buy a couple of 3550's and a few extra NIC's for your PC to build a full a
lab...
-Ryan
On 9/11/06, Radioactive Frog <pbhatkoti@gmail.com> wrote:
> Dynagen will figure out the correct module to use for the 7200, be it
> PA-4E or I/O-FE.
> =======================================
>
> If that is the case (can simulate 3550 on 72xx simulator), is there
> still need to buy all expensive LAB equipment?????????
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:40 ART