From: Church, Chuck (cchurch@multimax.com)
Date: Tue Sep 12 2006 - 09:18:30 ART
Someone correct me if I'm wrong, but I don't think there are any
Ethernet switch modules for the 7200. Sure, you can add Ethernet
interfaces, but you can't make them switch ports and assign them to a
VLAN. So a 3550 is still going to be pretty useful. But for all the
routing, yeah, this emulator can be pretty useful.
Chuck Church
Network Engineer
CCIE #8776, MCNE, MCSE
Multimax, Inc.
Enterprise Network Engineering
Home Office - 864-335-9473
Cell - 864-266-3978
cchurch@multimax.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Radioactive Frog
Sent: Tuesday, September 12, 2006 1:16 AM
To: WorkerBee
Cc: Marcio Ferreira; ccielab@groupstudy.com
Subject: Re: Cisco 7200 Router Simulator for CCIE R&S Lab practice &
MPLS LAB practice
Dynagen will figure out the correct module to use for the 7200,
be it PA-4E or I/O-FE.
=======================================
If that is the case (can simulate 3550 on 72xx simulator), is there
still
need to buy all expensive LAB equipment?????????
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:40 ART