From: WorkerBee (ciscobee@gmail.com)
Date: Tue Sep 12 2006 - 01:51:41 ART
You can connect the 7200 LAN to a virtual switch.
For example, you can connect R1 and R2 to Vlan 10 of a virtual switch
and connecting R1 and R2 s0/0 back-to-back. By default, you don't need
to supply clock rate to the serial interfaces. It appear as connecting
to a DCE cable.
Dynagen Template :
[[R1]]
s0/0 = R2 s0/0
E2/0 = LAN 10
E2/1 = LAN 20
[[R2]]
E2/0 = LAN 10
PS: Dynagen will figure out the correct module to use for the 7200,
be it PA-4E or I/O-FE.
On 9/12/06, Radioactive Frog <pbhatkoti@gmail.com> wrote:
> Can't we simulate the ethernet Switching module inside the 72xx series
> router? HEnce we don't need the 3550 switch at all?
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:40 ART