From: Scott Morris (swm@emanon.com)
Date: Sun Sep 10 2006 - 23:03:09 ART
One assumes that you save your configs. :)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
CCIEin2006
Sent: Sunday, September 10, 2006 9:08 PM
To: Cisco certification
Subject: Mac-address sticky IE vol2 lab 3
Hi group,
In IE vol 2 lab 3 task 1.3 the task states to only accept traffic from mac
address 0000.0c12.3456 without using switchport port-security mac-address
0000.0c12.3456 command. Also this MAC needs to be stored in config in case
of software reload.
The solution guide states to use the switchport port-security mac-address
sticky command, however Cisco documentation states:
"When sticky learning is enabled, the interface adds all secure MAC
addresses that are dynamically learned to the running configuration "
Being that the mac-address is added to the running configuration, it will
not survive a reload, will it? Is that solution valid?
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:40 ART