IEWB, LAB 7, VOL II, TASK 8.2

From: ismail el-shalh (ishelh_mdsa@yahoo.com)
Date: Fri Sep 08 2006 - 22:08:37 ART

Hi Group,
   
  Sorry for this basic question,
   
   
  I want to make sure that my method in setting the byte-count is correct
   
  The task states:
   
  Users in your network have been complaining bout slow FTP transfers when accessing servers behind BB1. In order to resolve this , configure R6 so that FTP transfers are guaranteed at least 10Mbps of it/s Ethernet interface connected to VLAN 46.
  - Do not use CBWFQ to accomplish this
   
   
  Now R6 has Gig interface connection so the speed is 1Gbps, I used the following equation :
   
  I choose Byte count to be 10,000
   
  (Required FTP Bandwidth / Total Bandwidth of the link) x Total Byte Count
   
  So, (10,000,000 / 1000,000,000) x 10,000 = 100 Bytes
   
  The remaining byte count will be assigned to the default class (10,000  100) = 9900
   
   
  So queue 1 will be 100 bytes and the default queue will be 9900
   
  But the solution was done in another way , here is the solution in the workbook :
   
  Interface GigabitEthernet0/0
  Custom-queue-list 1
  !
  Queue-list 1 protocol ip 1 tcp ftp-data
  Queue-list 1 default 2
  Queue-list 1 queue 1 byte-count 1000
  Queue-list 1 queue 2 byte-count 9000
   
   
  I will appreciate if some one can help me with understanding this issue
   
   
  Thanks in advance
  Ismail

                 
---------------------------------
Get your email and more, right on the new Yahoo.com

This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:40 ART