From: Petr Lapukhov (petr@internetworkexpert.com)
Date: Tue Sep 05 2006 - 01:36:49 ART
Victor,
Back in days Scott Morris posted a link to DocCD, located within section:
"Command Reference/IOS Bridging & IBM Networking"
It has Appendix with Ethertype codes:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123tcr/123tb1r/ib1_apgt.htm
Check it out, it has the most common ethertypes. As for LSAPs, I didn't find
a good
reference on DocCD :)
HTH
2006/9/5, Victor Cappuccio <cvictor@protokolgroup.com>:
>
> Hi Guys,
>
> I'm trying to apply a vlan filter to deny IP ARP from a particular host.
> It
> took me long time to reach to this link to know what value ARP Has (I have
> very bad memory for numbers); So not counting much on the proctor help the
> debugs and the DocCD are the only friend I have.
>
>
> http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/cnfg_nts/token/4
> 158_02.htm
>
> So my question is: Is there any debug command that could show me what is
> the
> ARP EtherType Value ???
>
> Without going to that specific link??
>
>
> mac access-list extended NO_ARP
> permit host 1234.1234.1234 any 0x806 0x0
>
> vlan access-map TASK 10
> action drop
> match mac address NO_ARP
> vlan access-map TASK 20
> action forward
> vlan filter TASK vlan-list 1
>
> Thanks
> Victor.-
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Petr Lapukhov, CCIE #16379 petr@internetworkexpert.comInternetwork Expert, Inc. http://www.InternetworkExpert.com Toll Free: 877-224-8987 Outside US: 775-826-4344
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:39 ART