From: Sean C. (Upp_and_Upp@hotmail.com)
Date: Sun Sep 03 2006 - 17:01:10 ART
HI Charles,
I don't have the lab in front of me, but if I had to guess, I'd ask what is
R4's addy and is it in the same subnet as it's neighbor on the RIP link. Is
the addy different (ip unnumbered loop) or is R4 receiving it's address from
somewhere else (i.e. DHCP)?
Just guessing (I think I remember seeing this in one of their labs),
Sean
----- Original Message -----
From: "CharlesB" <cbalik@adelphia.net>
To: "tonynguyenchi" <tonynguyenchi.ccie@gmail.com>; <ccielab@groupstudy.com>
Sent: Sunday, September 03, 2006 9:24 AM
Subject: RE: InternetworkExpert Ver3 Lab 13 Task 4.2 RIP
Group, I am sorry to resurrect this topic again, but I think I am still not
clear.
I understand and read the other emails about this rip do not send/receive
updates on this ethernet interface, using distro lists, access lists etc.
But my point here is to understand the provided solution by IE.
It seems that redistribution of the network block in to RIP by redistro
connected does accomplish the task. I did debug the rip updates and events.
No rip sent on this interface and no rip updates received on this interface
when redistro connected solution used.
But what is the point of "no validate-update-source" here. I know that the
command and what it does, but I just could not relate it to this task.
router rip
version 2
no validate-update-source
redistribute connected metric 1 route-map CONNECTED2RIP
network 139.1.0.0
network 150.1.0.0
no auto-summary
route-map connected2rip permit 10
match interface FastEthernet0/0
r4#sh ip int brie
Interface IP-Address OK? Method Status
Prot
ocol
FastEthernet0/0 204.12.5.4 YES manual up
up
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
tonynguyenchi
Sent: Thursday, August 31, 2006 2:34 AM
To: ccielab@groupstudy.com
Subject: InternetworkExpert Ver3 Lab 13 Task 4.2 RIP
Dear Group,
The task requires: configure R4 to advertise the 204.12.1.0/24 (F0/0) subnet
via RIP, but do not send and receive RIP update on this interface.
Can I do this as the following:
router rip
version 2
passive-interface FastEthernet0/0
network 139.1.0.0
network 150.1.0.0
network 204.12.1.0
distribute-list BLOCK_RIP in FastEthernet0/0
no auto-summary
!
ip access-list standard BLOCK_RIP
deny any
Thanks and best regards,
Tony
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:39 ART