From: Joshua Lauer (jslauer@hotmail.com)
Date: Sun Sep 03 2006 - 09:43:48 ART
I'm not sure what this lab is since I dont have it
but...
normally you'll want to do the minimal amount of
redistribution necessary to gain full reachability.
Mutual redistribution everywhere is usually a bad
idea, are your stopping route-feedback and other
nasties with tags? Ipexpert has an online forum are
you finding anything there?
JL
Joshua Lauer
CCIE#16024
CCNP, CCSP, CCDP, CCIP, INFOSEC
----- Original Message -----
From: "Tandou Mohamed" <dtandou@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Saturday, September 02, 2006 11:30 PM
Subject: IPEXPERT SECTION 21 LAB C
> Hello everyone,
> i need a help about redistribute anytime i do it
> i get routing loop.
> i am doing ipexpert workbook R&S section 21 lab
> C.
> scenario:
> R1 is running ospf area 0 with R2 on
> fastethernet.
>
> There is frame relay running on R2,R4,R5 and R6
>
> R2 is running eigrp on the frame link with R4, R5
> and R6 and also running rip with R5 on second
> Serial1.
>
> R5 is running ospf area 0 with R6 and R7 on
> FastEthernet, eigrp on frame relay link with R2,
> R4, and R6 on serial interface, running rip with
> R2 on serial 1
>
> R6 is running ospf area 0 with R5 and R7 on
> FastEthernet, eigrp on frame relay link with R2,
> R4, and R5 on serial interface
>
> R4 is just running eigrp with R2, R5, and R6 on
> frame link.
>
> R7 is running ospf area 0 with R5 and R6 on
> fastethernet and area 0 on serial connection with
> R8
>
> R8 is running ospf area 0 with R7 on serial and
> rip with BB2
>
> My configuration looks like this:
>
> On R2 i redistribute rip into ospf and eigrp, on
> eigrp i redistribute rip and ospf and finally on
> ospf i redistribute rip and eigrp
>
> On R5 i redistribute rip into ospf and eigrp, on
> eigrp i redistribute rip and ospf and finally on
> ospf i redistribute rip and eigrp
>
> On R6 i redistribute ospf into eigrp and eigrp
> into ospf
>
> On R8 redistribute rip into ospf and ospf into
> rip.
>
> i am getting routing loop when i ping from R6 to
> R1
> i can't ping from R7 or R8 to either R5,R6 or R7.
>
> Can someone explain what i am doing wrong. i know
> there are a lot of redistribution maybe i am not
> suppose to redistribute somewhere.
>
> Thanks,
>
> TM
>
>
> ---------------------------------
> Do you Yahoo!?
> Get on board. You're invited to try the new Yahoo!
> Mail.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:39 ART