From: Noor Yousuf (nyousuf@cciint.com)
Date: Fri Sep 01 2006 - 11:58:33 ART
I cannot run this command after creating a macro
sw1(config)#macro global apply PING
^
% Invalid input detected at '^' marker.
My IOS version is IOS (tm) C3550 Software (C3550-I5K2L2Q3-M), Version
12.1(19)EA1a,
Any thoughts?
-----Original Message-----
From: csica [mailto:csica@liweb.net]
Sent: Monday, August 28, 2006 9:32 PM
To: 'CharlesB'; Noor Yousuf; 'Cisco certification'
Subject: RE: script to ping all routers/switches
Unfortunately TCL is not supported on the 3500's. You can, however,
create
a macro and apply it globally. You could configure RSH and use your TCL
script, however I find this to be much easier.
For example:
Rack1SW1(config)#
Rack1SW1(config)#macro name PING
Enter macro commands one per line. End with the character '@'.
do ping 1.1.1.1
do ping 2.2.2.2
do ping 3.3.3.3
do ping 4.4.4.4
@
Rack1SW1(config)#macro global apply PING
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 2.2.2.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/4 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 3.3.3.3, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/4 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 4.4.4.4, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/4 ms
Rack1SW1(config)#
HTH,
Christian
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
CharlesB
Sent: Monday, August 28, 2006 11:50 AM
To: Noor Yousuf; Cisco certification
Subject: RE: script to ping all routers/switches
I just post this yesterday too, here it is,
This is from IE workbooks.
First, get in the tcl level
r5#tcl
r5#tcl?
tclquit tclsh
r5#tclsh
r5(tcl)#
Then, paste your script.
r5#tclsh
r5(tcl)#foreach i {
+>(tcl)#150.3.1.1
+>(tcl)#150.3.2.2
+>(tcl)#150.3.3.3
+>(tcl)#150.3.4.4
+>(tcl)#150.3.5.5
+>(tcl)#150.3.6.6
+>(tcl)#150.3.7.7
+>(tcl)#150.3.8.8
+>(tcl)#192.10.3.6
+>(tcl)#204.12.3.4
+>(tcl)#54.3.2.6
+>(tcl)#} { puts [ exec "ping $i" ] }
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 150.3.1.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 84/85/88 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 150.3.2.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 112/114/116
ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 150.3.3.3, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 60/60/60 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 150.3.4.4, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 28/30/32 ms
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Noor Yousuf
Sent: Monday, August 28, 2006 8:43 AM
To: Cisco certification
Subject: script to ping all routers/switches
Hi,
Can any one tell me how to create a script to ping all the
routers/switches in the lab exam and how to use it?
Thanks,
Noor
Noor Yousuf
Senior Network Engineer
Connections Canada Inc.
5466 Timberlea Blvd, Unit A
Mississauga, ON L4W 2T7
Office: 905.890.0777 x 7171 Fax: 905.206.0777
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:39 ART