From: sabrina pittarel (sabri_esame@yahoo.com)
Date: Wed Aug 30 2006 - 15:00:24 ART
Yes,
neighbor command should be applied both sides.
Sabrina
----- Original Message ----
From: Aamir Aziz <aamiraz77@gmail.com>
To: ccielab@groupstudy.com
Sent: Wednesday, August 30, 2006 2:15:54 AM
Subject: EIGRP Neighbor command
Hi there ppl,
I want to know, if the task says use unicast in EIGRP, (only two routers
running EIGRP) is it required in to specifiy neighbor command on both sides.
i tried from a single router and its not forming adjacency with the other
one.
R6#debug eigrp pack
EIGRP Packets debugging is on
(UPDATE, REQUEST, QUERY, REPLY, HELLO, IPXSAP, PROBE, ACK, STUB,
SIAQUERY, SIAREPLY)
R6#
*Mar 1 00:49:23.874: EIGRP: Sending HELLO on Ethernet0/1.3 nbr 192.1.1.254
*Mar 1 00:49:23.874: AS 100, Flags 0x0, Seq 0/0 idbQ 0/0 iidbQ un/rely
0/0
R6#
*Mar 1 00:49:27.291: EIGRP: Received HELLO on Ethernet0/1.3 nbr 192.1.1.254
*Mar 1 00:49:27.291: AS 100, Flags 0x0, Seq 0/0 idbQ 0/0
*Mar 1 00:49:27.291: EIGRP: Ignore multicast Hello Ethernet0/1.3
192.1.1.254
R6#
*Mar 1 00:49:28.309: EIGRP: Sending HELLO on Ethernet0/1.3 nbr 192.1.1.254
*Mar 1 00:49:28.309: AS 100, Flags 0x0, Seq 0/0 idbQ 0/0 iidbQ un/rely
0/0
R6#
*Mar 1 00:49:32.251: EIGRP: Received HELLO on Ethernet0/1.3 nbr 192.1.1.254
*Mar 1 00:49:32.251: AS 100, Flags 0x0, Seq 0/0 idbQ 0/0
*Mar 1 00:49:32.251: EIGRP: Ignore multicast Hello Ethernet0/1.3
192.1.1.254
*Mar 1 00:49:32.916: EIGRP: Sending HELLO on Ethernet0/1.3 nbr 192.1.1.254
*Mar 1 00:49:32.916: AS 100, Flags 0x0, Seq 0/0 idbQ 0/0 iidbQ un/rely
0/0
*Mar 1 00:49:42.797: AS 100, Flags 0x0, Seq 0/0 idbQ 0/0 iidbQ un/rely
0/0
R
Many thanks,
Aamir
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:59 ART