From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Sat Aug 26 2006 - 03:06:20 ART
James,
Ok I think see what you are trying to do now. Without your
configuration I couldn't see exactly what you were trying to do. Can
you paste the configuration you are trying to apply?
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: Brian Dennis
Sent: Friday, August 25, 2006 10:58 PM
To: 'James Nendel'; ccielab@groupstudy.com
Subject: RE: QoS -- SCOTT or the BRIANS
Maybe I'm missing the point of your question but when you apply a
policy-map to a virtual template interface the policy will be inherited
by the virtual access interface when the PPPoFR connection comes up.
See below:
hostname Rack1R3
!
class-map match-all PPPoFR_MAP
match any
!
policy-map PPPoFR_POLICY
class PPPoFR_MAP
police 8000 conform-action transmit exceed-action drop !
interface Virtual-Template1
ip address 155.1.13.3 255.255.255.0
service-policy output PPPoFR_POLICY
Rack1R3#sho policy-map interface virtual-template 1
Virtual-Template1
Service-policy output: PPPoFR_POLICY
Service policy content is displayed for cloned interfaces only such
as vaccess and sessions Rack1R3# Rack1R3#sho policy-map interface
virtual-access 1
Virtual-Access1
Service-policy output: PPPoFR_POLICY
Class-map: PPPoFR_MAP (match-all)
1 packets, 14 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
police:
cir 8000 bps, bc 1500 bytes
conformed 0 packets, 0 bytes; actions:
transmit
exceeded 0 packets, 0 bytes; actions:
drop
conformed 0 bps, exceed 0 bps
Class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
Rack1R3#ping 155.1.13.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 155.1.13.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 32/32/36 ms
Rack1R3#sho policy-map interface virtual-access 1
Virtual-Access1
Service-policy output: PPPoFR_POLICY
Class-map: PPPoFR_MAP (match-all)
7 packets, 558 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
police:
cir 8000 bps, bc 1500 bytes
conformed 5 packets, 530 bytes; actions:
transmit
exceeded 0 packets, 0 bytes; actions:
drop
conformed 0 bps, exceed 0 bps
Class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
Rack1R3#ping 155.1.13.1 size 1500
Type escape sequence to abort.
Sending 5, 1500-byte ICMP Echos to 155.1.13.1, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
Rack1R3#sho policy-map interface virtual-access 1
Virtual-Access1
Service-policy output: PPPoFR_POLICY
Class-map: PPPoFR_MAP (match-all)
14 packets, 8116 bytes
5 minute offered rate 3000 bps, drop rate 3000 bps
Match: any
police:
cir 8000 bps, bc 1500 bytes
conformed 5 packets, 530 bytes; actions:
transmit
exceeded 5 packets, 7530 bytes; actions:
drop
conformed 0 bps, exceed 3000 bps
Class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
Rack1R3#
As you can see the policy is allowing the packets that conform and
dropping the ones that don't.
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
James Nendel
Sent: Friday, August 25, 2006 10:04 PM
To: ccielab@groupstudy.com
Subject: QoS -- SCOTT or the BRIANS
Hi,
How do I enable CBWFQ in a Frame-relay p2p subinterface that is using a
virtual-template ?
config-if)#service-policy out DEFAULT
Class Based Weighted Fair Queueing will be applied only to the
Virtual-Access interfaces associated with an MLP bundle.
#show policy-map interface virtual-template 1
Virtual-Template1
Service-policy output: DEFAULT
Service policy content is displayed only for cloned interfaces only
such as vaccess and sessions
Please help
Thx
James
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:58 ART