From: Hafizur Rahman \(UK\) (hafizur.rahman@uk.didata.com)
Date: Fri Aug 25 2006 - 13:49:37 ART
Thanks Brian
-----Original Message-----
From: Brian Dennis [mailto:bdennis@internetworkexpert.com]
Sent: Fri 25/08/2006 17:37
To: Hafizur Rahman (UK); ccielab@groupstudy.com
Cc:
Subject: RE: IE vol - 1 lab - 2 Rmon question
This should help answer your question.
Rack1R5#show debug
SNMP:
SNMP packet debugging is on
Rack1R5#
Rack1R5#sho run | include snmp-server enable trap
Rack1R5#sho run | include rmon
rmon event 1 trap IETRAP owner config
rmon event 2 trap IETRAP owner config
rmon alarm 1 lsystem.56.0 60 absolute rising-threshold 1 1
falling-threshold 0 2 owner config
Rack1R5#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Rack1R5(config)# rmon alarm 1 lsystem.56.0 60 absolute rising-threshold
1 1 falling-threshold 0 2
Rack1R5(config)#
%RMON-5-RISINGTRAP: Rising trap is generated because the value of
lsystem.56.0 exceeded the rising-threshold value 1
SNMP: Queuing packet to 132.1.33.100
SNMP: V1 Trap, ent rmon, addr 132.1.35.5, gentrap 6, spectrap 1
alarmEntry.1.1 = 1
alarmEntry.3.1 = lsystem.56.0
alarmEntry.4.1 = 1
alarmEntry.5.1 = 29
alarmEntry.7.1 = 1
SNMP: Packet sent via UDP to 132.1.33.100
Rack1R5(config)#
I will also add a note that the "snmp-server enable trap" command is not
needed in the solutions guide. This question actually comes up a lot.
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Hafizur Rahman (UK)
Sent: Friday, August 25, 2006 9:01 AM
To: ccielab@groupstudy.com
Subject: IE vol - 1 lab - 2 Rmon question
Hi There
Question ask to configure a router to generate SNMP trap when average
CPU untilization reaches the linit.
and then send trap to 132.1.33.100
Config ---
Rmon alarm config
ramon trap config
snmp server host 132.1.33.100 IEtrap
My question is, do I need to configur "snmp-server enable trap" command
here or not. IE solution does not include this command
You help will be highly appreciated
Thanks
Hafi
-----------------------------------------
Dimension Data - providing global IP based solutions and services for
over 20 years supported locally from a single point of contact
This email is confidential. If you are not the intended recipient then
you must not copy it, forward it, use it for any purpose, or disclose it
to another person.
Please also note that the author of this email is not authorised to;
make any offers capable of acceptance unless expressly stated in a
validly dated and attached document which shall be subject to the terms
and conditions stated therein or, conclude any contract on behalf of
Dimension Data by email.
Although Dimension Data has taken reasonable precautions to ensure no
viruses are present in this email, the company cannot accept
responsibility for any loss or damage arising from the use of this email
or attachments.
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:58 ART