From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Fri Aug 25 2006 - 12:09:04 ART
3620s do not support a lot of the IPv6 features. If you can get
3640s instead that's what I would recommend. The 3524XL is a layer 2
only switch, it does not support routing protocols. The 3550 is a layer
2 and layer 3 switch that supports RIP, OSPF, EIGRP, BGP, etc. The new
3560 is basically the same as the 3550 but adds IPv6 support.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Sumanta B
> Sent: Friday, August 25, 2006 5:04 AM
> To: Cisco certification
> Subject: Lab Setup Help
>
> Hi Brian,
>
> I have gone through your documentation for the lab and would like you
to
> help me for the following doubts:-
>
> 1. Can we use 3620 instead of 3640 ? What will be the difference on
it?
>
> 2. Whats the difference between 3550 XL and 3524 XL ?
>
> Regards,
> Sumanta B
>
>
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:58 ART