From: Hough, Earl (Earl.Hough@sarcom.com)
Date: Wed Aug 23 2006 - 07:36:11 ART
What you need for the non-XM version of the 2620 which will support IPv6
OSP3 is Enterprise Plus 12.2(15)T17. I believe you could also use the
latest mainline 12.3 (non-T) version as well and still be able to fit
within the flash and dram limitations of the 2620.
Earl Hough CCIE #16508
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
trevelle@wowway.com
Sent: Wednesday, August 23, 2006 5:51 AM
To: ccielab@groupstudy.com
Subject: OSPF V3
I just spent 2hrs on Cisco web site trying to find out if ospf v3 is
supported on a Cisco 2620. Please let me know if it is and what IOS I
need to down load.
Here is my specs.
cisco 2620 (MPC860) processor (revision 0x600) with 56320K/9216K bytes
of memory
.
Processor board ID JAD05340DW8 (2107684749)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:58 ART