From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Tue Aug 22 2006 - 22:01:17 ART
Are you referring to the "ip pim autorp listener" command as there isn't
a "ip pim auto-rp" command?
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hi
mc_r/mlt_i2h.htm
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
trevelle@wowway.com
Sent: Tuesday, August 22, 2006 5:49 PM
To: ccielab@groupstudy.com
Subject: IP PIM auto-rp not available.
I am not able to us the command ip pim auto-rp on my sw1. Both SW1 AND
SW2 are running the same IOS. Any suggestions?
SW2(config)#ip pim a?
accept-register accept-rp autorp
SW2(config)#ip pim a
SW1#show flash
Directory of flash:/
2 -rwx 319 Mar 06 1993 03:17:23 system_env_vars
3 -rwx 2448 Mar 06 1993 03:47:53 config.text
4 -rwx 5 Mar 06 1993 03:47:53 private-config.text
6 -rwx 1156 Mar 01 1993 00:46:42 vlan.dat
7 drwx 192 Mar 01 1993 00:04:52
c3550-i5q3l2-mz.121-12c.EA1
24 -rwx 6917122 Apr 03 1993 01:19:31
c3550-ipservicesk9-mz.122-25.SEC
.bin
25 -rwx 0 Mar 06 1993 03:17:23 env_vars
15998976 bytes total (3496448 bytes free) SW1#
SW2#show flash
Directory of flash:/
2 -rwx 319 Mar 1 1993 00:03:07 +00:00 system_env_vars
3 -rwx 24 Mar 4 1993 16:48:58 +00:00
private-config.text
5 -rwx 6917122 Mar 1 1993 09:11:36 +00:00
c3550-ipservicesk9-mz.122-
25.SEC.BIN
6 -rwx 1156 Mar 1 1993 00:46:25 +00:00 vlan.dat
8 drwx 192 Mar 1 1993 00:04:52 +00:00
c3550-i9q3l2-mz.121-19.EA1
c
7 -rwx 0 Mar 1 1993 00:03:06 +00:00 env_vars
88 -rwx 3239 Mar 4 1993 16:48:58 +00:00 config.text
15998976 bytes total (2667008 bytes free)
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:58 ART