From: Aamir Aziz (aamiraz77@gmail.com)
Date: Mon Aug 21 2006 - 07:04:49 ART
So do we have to put spanning tree port fast command even if we are or not
making manual trunk?
Aamir
On 8/21/06, Udo Konstantin <ccie_groupstudy@yahoo.de> wrote:
>
> thank you....that was also what I heard from a friend...hope it works...
> > if you are config that port as Truck port then yes u need to define
> > native vlan but it is not nesscary to biuld port as truck port whne u
> > you only connect Cisco Ip fone .if you use switch port access vlan
> > xxxxx and switch port voice vlan xxxx its should work .spanning tree
> > port fast is not define by default you have to specafied on the port .
> >
> >
> >
> > Many thanks ,
> >
> > Sameer
> >
> >
> >
> >
> >
> >
> >
> > ______________________________________________________________
> > From: Udo Konstantin <ccie_groupstudy@yahoo.de>
> > Reply-To: Udo Konstantin <ccie_groupstudy@yahoo.de>
> > To: Vishal Patel <vpatel@accessproviders.com.au>
> > CC: "'david robin'" <robindavi@gmail.com>, "'Cisco
> > certification'" <ccielab@groupstudy.com>
> > Subject: RE: Voice vlan
> > Date: Sun, 20 Aug 2006 16:33:20 +0200
> > MIME-Version: 1.0
> > Received: from lists.groupstudy.com ([207.44.210.9]) by
> > bay0-mc6-f4.bay0.hotmail.com with Microsoft
> > SMTPSVC(6.0.3790.2444); Sun, 20 Aug 2006 07:37:15 -0700
> > Received: (from sympa@localhost)by lists.groupstudy.com
> > (8.12.11.20060308/8.11.6) id k7KEbE6J001393;Sun, 20 Aug 2006
> > 10:37:14 -0400
> > Received: from groupstudy.com (www.groupstudy.com
> > [209.51.144.7])by lists.groupstudy.com
> > (8.12.11.20060308/8.11.6) with ESMTP id k7KEXWHk001349for
> > <ccielab@lists.groupstudy.com>; Sun, 20 Aug 2006 10:33:32
> > -0400
> > Received: from groupstudy.com (groupstudy.com [127.0.0.1])by
> > groupstudy.com (8.12.11.20060308/8.12.10) with ESMTP id
> > k7KEXXa5020758GroupStudy Mailer; Sun, 20 Aug 2006 10:33:33
> > -0400
> > Received: (from listserver@localhost)by groupstudy.com
> > (8.12.11.20060308/8.12.11/Submit) id k7KEXX3N020756for
> > ccielabxhiddenx; Sun, 20 Aug 2006 10:33:33 -0400
> > Received: from smtp004.mail.ukl.yahoo.com
> > (smtp004.mail.ukl.yahoo.com [217.12.11.35]) by groupstudy.com
> > (8.12.11.20060308/8.12.10) with SMTP id k7KEXTeP020699
> > GroupStudy Mailer; Sun, 20 Aug 2006 10:33:29 -0400
> > Received: (qmail 19681 invoked from network); 20 Aug 2006
> > 14:33:22 -0000
> > Received: from unknown (HELO linux)
> > (ccie?groupstudy@84.56.220.72 with plain) by
> > smtp004.mail.ukl.yahoo.com with SMTP; 20 Aug 2006 14:33:22
> > -0000
> > >Hi,
> > >
> > >why didn't u use _switchport mode access vlan 606_ instead of
> > >_switchport trunk native vlan 606_ ?
> > >
> > >Udo
> > > > Iam using cisco voip phones and I have 3550 series
> > switches.
> > > >
> > > > Below is my config for a switchport.
> > > >
> > > > interface FastEthernet0/4
> > > > description Jahan-desk
> > > > switchport trunk encapsulation dot1q
> > > > switchport trunk native vlan 606
> > > > switchport mode trunk
> > > > switchport voice vlan 154
> > > > End
> > > >
> > > >
> > > > 606 is my data vlan and 154 is voice vlan
> > > >
> > > >
> > > > I don't think spanning port fast is enable by default when
> > I config voice
> > > > vlan.
> > > >
> > > > Cheers
> > > >
> > > > Vishal
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]
> > On Behalf Of
> > > > david robin
> > > > Sent: Wednesday, 22 March 2006 9:10 AM
> > > > To: Cisco certification
> > > > Subject: Voice vlan
> > > >
> > > > dear all,
> > > > I m confused a little with the voice VLAN, as I know the
> > ip phone is
> > > > attached to the switch with dot1q trunk, shall we
> > configure sw trunk encap
> > > > ???
> > > >
> > > > interface fast 0/7
> > > > sw trunk encap dot1q
> > > > sw access 3
> > > > switchport voice vlan 5
> > > > !
> > > > I dunno if this right or not, I checked in the doc CD but
> > they didnt say to
> > > > configure this command, what they mentioned that the port
> > fast is enabled by
> > > > default when you configure the voice vlan, and this
> > confuse me more, port
> > > > fast is enabled only on access ports ????
> > > >
> > > > please help me about this issue
> > > >
> > > > best regards ,
> > > >
> > > >
> >
> _______________________________________________________________________
> > > > Subscription information may be found at:
> > > > http://www.groupstudy.com/list/CCIELab.html
> > > >
> > > >
> >
> _______________________________________________________________________
> > > > Subscription information may be found at:
> > > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> > >
> > >___________________________________________________________
> > >Telefonate ohne weitere Kosten vom PC zum PC:
> > http://messenger.yahoo.de
> > >
> >
> >_______________________________________________________________________
> > >Subscription information may be found at:
> > >http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > ______________________________________________________________________
> > Express yourself instantly with MSN Messenger! MSN Messenger Download
> > today it's FREE!
>
>
>
>
>
>
> ___________________________________________________________
> Der fr|he Vogel fdngt den Wurm. Hier gelangen Sie zum neuen Yahoo! Mail:
> http://mail.yahoo.de
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:57 ART