From: Michael Stout (michaelgstout@hotmail.com)
Date: Sun Aug 20 2006 - 14:57:32 ART
cat 3550 qos is my weakest area but i'll give it a try.
you must enable qos globally on the 3550 before it will work.
Note: Others may have a more complete answer
--------------------------------------------------------------------
From: Udo Konstantin <ccie_groupstudy@yahoo.de>
Reply-To: Udo Konstantin <ccie_groupstudy@yahoo.de>
To: CCIE Groupstudy <ccielab@groupstudy.com>
Subject: Per-Port Per-VLAN marking
Date: Sun, 20 Aug 2006 06:48:23 +0200
Hi all,
I had the following challange...
On a switch (3550) mark all incoming traffic from VLAN x with
precedence
4
As I understand I should use per-port per-vlan marking
Right now I configure
class-map match-all PREC4
match vlan X
policy-map PREC
class PREC4
set ip precedence 4
when I apply this policy-map to a interface on a switch assume fa0/6
the
map would be rejected because I need another one more statement under
class-map config. This is what I understand.
So I configure an access-list 101 and with match access-group I apply
it
as an additional statement into the class map
But right now I'm not sure if this really works...
Maybe anyone here had anything like this configured an can send an
example ??!
thanks
Udo
___________________________________________________________
Telefonate ohne weitere Kosten vom PC zum PC:
http://messenger.yahoo.de
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:57 ART