From: Vikram Dadlaney (vdadlaney@gmail.com)
Date: Fri Aug 18 2006 - 13:40:46 ART
Here is the post on the ccie sp list from back in April. I know I really
need to clear out my mailbox. :-)
"
i had no success with mpls on the 3620. At least not with the official ios
images. I tried these images which should be among the most recent ones
available for the 3620:
c3620-is-mz.122-15.T10.bin 12.2T IP-Plus
c3620-is-mz.123-17.bin 12.3 Mainline IP-Plus
c3620-j1s3-mz.122-15.T10.bin 12.2T Enterprise Basic
This matches also the result of the feature navigator, which does not
indicate mpls support on the 3620. FN shows a few features as mpls
enhanced for the 3620, but all the basic mpls functionality is missing.
If you don't mind unofficial images in your lab environment, you can try
to get your hands on a 12.0S image for the 3620. No support of any kind,
but works here very well: c3620-p-mz.120-28.3.S
In this image MPLS (LDP&TDP), MPLS/VPN, and basic MPLS-TE works.
The 3640 works fine as PE in the lab here. I am running
c3640-jk9s-mz.124-7.bin on it.
As other routers i am mainly using 4500/4700 with the inofficial 12.0S
images. Cheap and fast ..."
On 8/18/06, Vikram Dadlaney <vdadlaney@gmail.com> wrote:
>
> While I have never tried this I seem to remember a discussion sometime
> back with regards to the 3620's. I think they do not support MPLS atleast
> not the most recent versions. If you look through the software advisor tool
> you will find that MPLS isn't available while for the 3640's it is
> available. There is an old ios that did have basic features like LDP/TDP, TE
> etc. Again I haven't tried it myself so this could be incorrect. Please do
> correct me if I am wrong. thanks
>
>
> On 8/18/06, Brian McGahan <bmcgahan@internetworkexpert.com> wrote:
> >
> > Did you try "tag-switching ip"? The commands are identical as
> > long as you are running a common label protocol with your adjacent
> > neighbors (LDP or TDP).
> >
> >
> > HTH,
> >
> > Brian McGahan, CCIE #8593
> > bmcgahan@internetworkexpert.com
> >
> > Internetwork Expert, Inc.
> > http://www.InternetworkExpert.com <http://www.internetworkexpert.com/>
> > Toll Free: 877-224-8987 x 705
> > Outside US: 775-826-4344 x 705
> > 24/7 Support: http://forum.internetworkexpert.com
> > Live Chat: http://www.internetworkexpert.com/chat/
> >
> >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto: nobody@groupstudy.com] On Behalf
> > Of
> > > daveccie99@comcast.net
> > > Sent: Friday, August 18, 2006 10:37 AM
> > > To: ccielab@groupstudy.com
> > > Subject: MPLS
> > >
> > > I have the Cisco MPLS configuration on Cisco IOS software; 4 3620's
> > 64/16
> > > 2 2621's and would like to load an image on the devices that would
> > allow
> > > me
> > > to at least have the configurable parameter mpls ip recognized by
> > the
> > > software
> > > I checked the archive and saw that 12.2.8T3 was recommended for the
> > 3600's
> > > but i tried c3620-j1s3-mz.122-15.T17.bin and it did not recognize
> > mpls
> > >
> > > does anyone know a release of iops for the 3600s that would work for
> > this
> > > ?
> > > thanks.
> > >
> > >
> > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:57 ART