From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Fri Aug 18 2006 - 13:03:39 ART
Did you try "tag-switching ip"? The commands are identical as
long as you are running a common label protocol with your adjacent
neighbors (LDP or TDP).
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> daveccie99@comcast.net
> Sent: Friday, August 18, 2006 10:37 AM
> To: ccielab@groupstudy.com
> Subject: MPLS
>
> I have the Cisco MPLS configuration on Cisco IOS software; 4 3620's
64/16
> 2 2621's and would like to load an image on the devices that would
allow
> me
> to at least have the configurable parameter mpls ip recognized by
the
> software
> I checked the archive and saw that 12.2.8T3 was recommended for the
3600's
> but i tried c3620-j1s3-mz.122-15.T17.bin and it did not recognize
mpls
>
> does anyone know a release of iops for the 3600s that would work for
this
> ?
> thanks.
>
>
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:57 ART