From: David Timmons (masterdt@yahoo.com)
Date: Wed Aug 16 2006 - 14:38:13 ART
Hi,
I think you have to enable fast-switched PBR. The command is ip route-cache policy. Try that and see if it works. If not, I'll do some research....
----- Original Message ----
From: Hafizur Rahman (UK) <hafizur.rahman@uk.didata.com>
To: ccielab@groupstudy.com
Sent: Wednesday, August 16, 2006 11:10:40 AM
Subject: PBR and CEF
Hi There
I am trying to configure PBR on an interface. This router is currently load balancing across multiple interfaces. Interfaces are running CEF. Now when CEF is enabled PBR does not work. Without CEF it works fine. Following is my topology and config
10.55.1.1 load balancing between multiple link --- -- R9 F0/0-------- ---- 192.168.20.0 -------- R10
=============
R9 config:
route-map pol per 10
match ip add 6
set ip next hop 192.168.10.1
access-list 6 per 192.168.20.0 0.0.0.255
Ip cef
int f0/0
ip add 192.168.20.1
ip load-sharing per-packet
ip policy route-map pol
=====================
traceroute from R10 when Cef is enabled (not working)
traceroute 10:55.1.1
1 192.168.20.1 8 msec 8 msec 8 msec
2 192.168.21.3 4 msec
192.168.24.9 20 msec
192.168.21.3 4 msec
3 .10.50.7.1 20 msec
traceroute from R10 when CEF is disabled on R9 int( no ip route-cache CEF) - working
1 192.168.20.1 8 msec 8 msec 8 msec
2 192.168.10.1 20 msec
3 .10.50.7.1 5 msec
==================
Any idea how to achieve this with out disabling cef
Thanks in advance
Hafi
-----------------------------------------
Dimension Data - providing global IP based solutions and services
for over 20 years supported locally from a single point of contact
This email is confidential. If you are not the intended recipient
then you must not copy it, forward it, use it for any purpose, or
disclose it to another person.
Please also note that the author of this email is not authorised
to; make any offers capable of acceptance unless expressly stated
in a validly dated and attached document which shall be subject to
the terms and conditions stated therein or, conclude any contract
on behalf of Dimension Data by email.
Although Dimension Data has taken reasonable precautions to ensure
no viruses are present in this email, the company cannot accept
responsibility for any loss or damage arising from the use of this
email or attachments.
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:57 ART