From: ZeroFlash (Fire_Ice@verizon.net)
Date: Wed Aug 16 2006 - 07:57:30 ART
I would look at the question, does it state configure DHCP or VRRP or IRDP?
You said it states to configure DHCP only and have multiple gateways. This
can happen with DHCP so I would say that the answer is your second choice
rather than your first choice of VRRP.
That's just my opinion.
ZeroFlash
CCIE #16217
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Guzman, Chris
Sent: Wednesday, August 16, 2006 1:11 AM
To: ccielab@groupstudy.com
Subject: DHCP Default Gateway
I have a task that requires configuring a DHCP lease for a subnet.
There is a stipulation that for the default gateway, if R1 is down, then
R2 should be the default gateway. I am not allowed to use HSRP.
VRRP seems like a good solution, using the physical address of R1 as the
VRRP address for the DHCP pool.
ip dhcp pool pool1
default-router R1 (VRRP)
Would it also be acceptable to just to include a second address in the
dhcp pool such as
ip dhcp pool pool1
default-router R1 (x.x.x.x) R2 (x.x.x.x)
Thanks
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:57 ART