From: Michael White (mwhite@multimax.com)
Date: Tue Aug 15 2006 - 17:51:19 ART
I am unable to get OSPF or BGP neighbors from R2 to R1 and R2 to R3 via the
Ethernet connections. The only way a connection comes up is when I shut
down s0/0/0 on R2 and then the neighbor comes right up. Below are my debug
outputs from R2:
As anyone seen this problem or anything close. I have had no luck.
R2#debug ip ospf
*Aug 15 19:47:34.815: %BGP-3-NOTIFICATION: sent to neighbor 172.16.23.3 4/0
(hold time expired) 0 bytes adj
OSPF adjacency events debugging is on
R2#
*Aug 15 19:47:39.207: OSPF: Rcv DBD from 3.3.3.3 on FastEthernet0/0.23 seq
0x1293 opt 0x58 flag 0x7 len 32 mtu 1500 state EXCHANGE
*Aug 15 19:47:39.207: OSPF: Send DBD to 3.3.3.3 on FastEthernet0/0.23 seq
0x1293 opt 0x58 flag 0x2 len 212
*Aug 15 19:47:41.175: OSPF: Send DBD to 1.1.1.1 on Serial0/0/0.124 seq 0xA7E
opt 0x58 flag 0x7 len 32
*Aug 15 19:47:41.175: OSPF: Retransmitting DBD to 1.1.1.1 on Serial0/0/0.124
[8]
*Aug 15 19:47:41.175: OSPF: Rcv DBD from 1.1.1.1 on Serial0/0/0.124 seq
0x261 opt 0x58 flag 0x7 len 32 mtu 1500 state EXSTART
*Aug 15 19:47:41.175: OSPF: First DBD and we are not SLAVE
*Aug 15 19:47:44.207: OSPF: Rcv DBD from 3.3.3.3 on FastEthernet0/0.23 seq
0x1293 opt 0x58 flag 0x7 len 32 mtu 1500 state EXCHANGE
*Aug 15 19:47:44.207: OSPF: Send DBD to 3.3.3.3 on FastEthernet0/0.23 seq
0x1293 opt 0x58 flag 0x2 len 212
*Aug 15 19:47:46.175: OSPF: Send DBD to 1.1.1.1 on Serial0/0/0.124 seq 0xA7E
opt 0x58 flag 0x7 len 32
*Aug 15 19:47:46.175: OSPF: Retransmitting DBD to 1.1.1.1 on Serial0/0/0.124
[9]
*Aug 15 19:47:46.175: OSPF: Rcv DBD from 1.1.1.1 on Serial0/0/0.124 seq
0x261 opt 0x58 flag 0x7 len 32 mtu 1500 state EXSTART
*Aug 15 19:47:46.175: OSPF: First DBD and we are not SLAVE
*Aug 15 19:47:49.207: OSPF: Rcv DBD from 3.3.3.3 on FastEthernet0/0.23 seq
0x1293 opt 0x58 flag 0x7 len 32 mtu 1500 state EXCHANGE
*Aug 15 19:47:49.207: OSPF: Send DBD to 3.3.3.3 on FastEthernet0/0.23 seq
0x1293 opt 0x58 flag 0x2 len 212
R2#
*Aug 15 19:48:20.763: BGP: 172.16.23.3 passive open to 172.16.23.2
*Aug 15 19:48:20.763: BGP: 172.16.23.3 went from Active to Idle
*Aug 15 19:48:20.763: BGP: 172.16.23.3 went from Idle to Connect
*Aug 15 19:48:20.767: BGP: 172.16.23.3 rcv message type 1, length (excl.
header) 26
*Aug 15 19:48:20.767: BGP: 172.16.23.3 rcv OPEN, version 4, holdtime 180
seconds
*Aug 15 19:48:20.767: BGP: 172.16.23.3 went from Connect to OpenSent
*Aug 15 19:48:20.767: BGP: 172.16.23.3 sending OPEN, version 4, my as: 2000,
holdtime 180 seconds
*Aug 15 19:48:20.767: BGP: 172.16.23.3 rcv OPEN w/ OPTION parameter len: 16
*Aug 15 19:48:20.767: BGP: 172.16.23.3 rcvd OPEN w/ optional parameter type
2 (Capability) len 6
*Aug 15 19:48:20.767: BGP: 172.16.23.3 OPEN has CAPABILITY code: 1, length 4
*Aug 15 19:48:20.767: BGP: 172.16.23.3 OPEN has MP_EXT CAP for afi/safi: 1/1
*Aug 15 19:48:20.767: BGP: 172.16.23.3 rcvd OPEN w/ optional parameter type
2 (Capability) len 2
*Aug 15 19:48:20.767: BGP: 172.16.23.3 OPEN has CAPABILITY code: 128, length
0
*Aug 15 19:48:20.767: BGP: 172.16.23.3 OPEN has ROUTE-REFRESH
capability(old) for all address-families
*Aug 15 19:48:20.767: BGP: 172.16.23.3 rcvd OPEN w/ optional parameter type
2 (Capability) len 2
*Aug 15 19:48:20.767: BGP: 172.16.23.3 OPEN has CAPABILITY code: 2, length 0
*Aug 15 19:48:20.767: BGP: 172.16.23.3 OPEN has ROUTE-REFRESH
capability(new) for all address-families
BGP: 172.16.23.3 rcvd OPEN w/ remote AS 1000
*Aug 15 19:48:20.767: BGP: 172.16.23.3 went from OpenSent to OpenConfirm
*Aug 15 19:48:20.767: BGP: 172.16.23.3 send message type 1, length (incl.
header) 45
Very Respectfully,
Michael White
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:57 ART