Re: AS path not seen.

From: Evgeniy Voloshin (e.voloshin@equant.ru)
Date: Mon Aug 14 2006 - 07:23:17 ART

Hi!

show output of this commands:

R5#show ip bgp summary | i 150.1.4.4

R5#show ip bgp neighbors 150.1.4.4 routes

P.S. On R4 you turn synchronization on? 

---
Yev.

trevelle@wowway.com wrote:

>I am not able to see AS 400 path in R5 when I use show ip bgp. Is there something missing. 
>R4
>router bgp 400
> synchronization
> bgp router-id 150.1.4.4
> bgp log-neighbor-changes
> neighbor 150.1.5.5 remote-as 200
> neighbor 150.1.5.5 ebgp-multihop 255
> neighbor 150.1.5.5 update-source Loopback0
>
>R5
>router bgp 200
> no synchronization
> bgp router-id 150.1.5.5
> bgp log-neighbor-changes
> neighbor 136.1.15.1 remote-as 100
> neighbor 136.1.57.7 remote-as 200
> neighbor 136.1.245.2 remote-as 300
> neighbor 150.1.4.4 remote-as 400
> neighbor 150.1.4.4 ebgp-multihop 255
> neighbor 150.1.4.4 update-source Loopback0
> neighbor 192.10.1.254 remote-as 254
> neighbor 192.10.1.254 password CISCO
> no auto-summary
>
>_______________________________________________________________________
>Subscription information may be found at: 
>http://www.groupstudy.com/list/CCIELab.html

This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:57 ART