From: Paul Schuuring (paul.schuuring@tele2.com)
Date: Sun Aug 13 2006 - 10:26:22 ART
Hi Tony,
When they ask you to set the time fixed to 5 seconds. It's more likely to
adjust the forwarding time;
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12225see/scg/swstp.
htm#wp1150580
Configure the forward time of a VLAN. The forward delay is the number of
seconds a port waits before changing from its spanning-tree learning and
listening states to the forwarding state.
SW2(config)#spanning-tree vlan 1 forward-time 5
SW2#sh spanning-tree vlan 1 | i VLAN|ID|Forward
VLAN0001
Root ID Priority 24577
Hello Time 2 sec Max Age 20 sec Forward Delay 5 sec
Bridge ID Priority 24577 (priority 24576 sys-id-ext 1)
Hello Time 2 sec Max Age 20 sec Forward Delay 5 sec
Paul Schuuring
"tony hall" <tony_hall123@hotmail.co.uk>
Sent by: nobody@groupstudy.com
08/13/2006 01:41 PM
Please respond to
"tony hall" <tony_hall123@hotmail.co.uk>
To
ccielab@groupstudy.com
cc
Subject
Spanning-Tree
Hi Group,
Can some one explain to me that how can I shortened the time for listening
and learning to 5 sec on my switch.Please if some one can explain in bit
detail.
Regards, Tony.
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:57 ART